Address: Da cheng Century Industry Zone, Anzhen Town, Xishan District, Wuxi City, Jiangsu Province
FAX : +86-510-88710666
Compared with ordinary electric vehicles, the speed and climbing ability of electric motor are more prominent, which is one of the important characteristics that are loved by countless consumers. In order to ensure safety during daily use, users should pay attention to some minor problems when parking. And in use, should also pay attention to the protection of battery components, to ensure vehicle mileage.
First, what should we pay attention to when parking? The specific references are as follows:
1、After you reach your destination, before getting off the bus, turn off the power switch of the electric motor in time, and take the key to get out of the car and place it properly;
2、In order to keep your driving safe and keep the electric friction in good condition for a long time, it is recommended that the whole car should be maintained and cleaned regularly during use.
Second, what are the contents of the regular maintenance self-inspection of the electric motor?
First of all, in the daily use, in addition to the inspection of electric power, besides the brake system, it is necessary to check whether the wheel screws are locked before and after. At the same time, it is necessary to check whether the pattern of the outer tire is worn and cracked. Before trip, the pressure of the rear tire should be checked, whether the pressure of the rear tire is appropriate, the driving system is smooth, and so on. If it is not used for a long time, Please pay attention to regular charging to maintain your battery.
Third, how to ensure the driving mileage of the motor?
Good usage and maintenance skills will help to extend vehicle usage and maintain good mileage. In order to ensure the mileage of the electric motor, we need to charge the motor in time and maintain sufficient power. In addition, it is necessary to adjust the brake system according to the standard to make the brake system work in the most standard state.
Secondly, the front and rear tires of the motor vehicle must reach the normal pressure range;
The load of the whole electric friction should not exceed the maximum standard;
It is necessary to keep the speed as fast as possible, reduce the frequent braking, start up, and waste electric energy in the instant acceleration under the condition of ensuring safety.http://www.guoweimoto.com/