Jiangsu Guowei Motor Co.,Ltd
Jiangsu Guowei Motor Co.,Ltd

Catalogue

Contact US

Address: Da cheng Century Industry Zone, Anzhen Town, Xishan District, Wuxi City, Jiangsu Province

TEL: +86-510-88719551/88719012

FAX : +86-510-88710666

Website: www.guoweimoto.com

                 

Home > Exhibition > Content
Loading and unloading of electric battery and matters needing attention on the way
- May 03, 2018 -

Electric vehicles belong to a relatively easy and flexible vehicle, but there are some details that need to be paid attention to in the process of use. First, during the use of electric vehicles, we must pay attention to the correct way of charging and the protection of the battery.

First, with regard to the loading and unloading of electric vehicle batteries:

The first is to open the battery box lock above the battery box; 

Then pull the battery box handle and remove the battery box. 

Finally, after the charge is completed, put the battery box into the seat and lock. 

How to start an electric vehicle?

As users, when we use electric vehicles, starting operation is the most basic operation process. First, we insert the switch key into the power switch on the right side of the battery box and spin to an. At this time the electricity display lights, indicating that the power has been turned on. Then turn the right hand handle counterclockwise, the vehicle starts to start, the speed-regulating handle turns from small to large, and the speed also changes from slow to fast. If it is a booster model, with the rotation of the wheel, the vehicle will also start operation.

The problems that should be paid attention to in the course of electric vehicle:

1、When the electric vehicle starts, we should pay attention to keep the speed slow and accelerate slowly, so as to avoid the excessive waste of electric energy caused by the instant rapid acceleration, the auxiliary pedal start is better.

2、For battery and motor maintenance, please help with foot when the vehicle starts and climbs.

3、In order to ensure safety, we should use economic speed as far as possible. And try to reduce frequent brake, frequent start, to save electricity. 

4、In order to avoid overloading and damaging other parts of electric vehicle, it is necessary to avoid the phenomenon of fastening speed adjusting knob after braking.

5、When driving on muddy or rough roads, it is recommended to drive in an energy-efficient manner.

6、When an electric vehicle has electricity and cannot drive, it is necessary to turn off the power in time to avoid damage to the electric appliance.http://www.guoweimoto.com/